No-till Drill Parts & Equipment
Shop
-
LEGACY P/N WAS V 7173 – allen head capscrew (oversize), 3/8″ X 7/8″ (rear attachment to Kinze 2000 or JD pre-XP shank)$0.56
-
Hex-head capscrew, gr 8, 5/16" X 5/8" (attaches wings to Valion), uses dimple-lock 5/16" jamnut.$0.28
-
Wedge, up to 6-degrees of toe-out for closing wheels held on by a bolt (most late-model planters; early Kinze, JD 7000 & 7200 with updated closing brackets). Fits either 5/8" or 16mm bolts. Ideal for tough conditions such as high-clay, low-OM soils, or soddy seedbeds.$6.50
-
V-Closing Wheel Bracket with Cast “T” handle, Eccentric bushings and Hardened hex step bushings. Fits JD 7200, 7300, 1700 and accepts bolt on style closing wheels. Includes hardware kit to bolt wheels on bracket (standard 5/8 bolts). Closing spring not included; see Exapta’s M.4433 & M.4466..$64.95
-
You’ll need these spring clips to secure the Bullseye seed tube(Part # PPM700160) to the row unit on John Deere 1700 series planters(Model year 2007 and after). Deere seed tubes have a different mounting system and didn’t use the more secure pin method. So you will need to add these to your seed tube order if your planter row unit does NOT have pre-drilled holes for a pin and clip system. One package does 4 rows.$12.00
-
Machine washer, T2X or T3X.$0.35
-
Universal wrap-around planter bracket, for use with Keeton Universal-style tails or Flo-Rite tails (sold separately).$10.50
-
Dry tails are no longer sold separately. Buy the entire kit (tail + bracket).$29.00
-
Replacement tail only, for Universal bracket, or Scraper-Mount bracket. Two liquid application tubes. ‘Dry’ tails also available (same price).$29.00
-
(PP#100104) The original Keeton seed firmer straps directly to the seed tube, and may be reinforced by strapping around the seed tube guard & shank. It is a good choice if the Quick Attach or Universal brackets won't work with your planter, such as late-model Monosem (using a special steel bracket from Monosem). Also fits JD 7000 and newer (except ExactEmerge), all Kinze 2000s; Kinze 3000s that don't have the oversize seed tubes; White 6000 and newer. (Wave-Vision Ready). Includes liquid tubing and Y-splitter.$32.50
-
(PP# 100101) The original Keeton seed firmer straps directly to the seed tube, and may be reinforced by strapping around the seed tube guard & shank. It is a good choice if the Quick Attach or Universal brackets won't work with your planter, such as late-model Monosem (using a special steel bracket from Monosem). Also fits JD 7000 and newer (except ExactEmerge), all Kinze 2000s; Kinze 3000s that don't have the oversize seed tubes; White 6000 and newer. Will not work with WaveVision Sensor. No liquid capability.$31.50
-
Steel tab for the front & rear of K.600 Mojo Wire. Includes self-tapping screw.$4.21
All About Hydraulic Oil Coolers & Snorkel Kits
Stay cool; prevent clogging
Hydraulic oil coolers function by circulating oil through a radiator connected to a fan, which forces air over the radiator. This process cools the hydraulic oil while simultaneously warming the air entering the lines, helping to prevent clogging from sticky fertilizers and seed treatments.
When run with a snorkel, it helps remove humidity by pulling drier air from higher up, which is also cleaner air, so you reduce the amount of dust and debris that could cover the radiator. Snorkel kits are available with or without the oil coolers, for air carts and air boom applicators.