Mojo wires for Drills
-
$13.00Mojo Wire for drill Keeton. Fits Exapta's milled-top drill Keeton for Case P-500 / NH P2080 & other drills & GP twin-row planters.$11.00
Mojo Wire for drill Keeton. Fits all 2-pc drill Keetons, which also fit GP twin-row planters. Includes Wire, 2 small steel tabs with grooves, 2 self-tapping screws; Keeton sold separately.
$9.00Replacement stiffener wire, Mojo, for 2-pc drill Keetons (wire only, no hose clamp, small steel tab, or screw), w/ torsion loop & extra pressure for Case P-500 / NH 2080 drills & more.$9.00Stiffener wire, Mojo, for 2-pc drill Keetons (wire only, no hose clamp)$9.00Stiffener wire, Mojo, for 2-pc drill Keetons (wire only, no hose clamp).$5.86Small steel tab w/ threaded hole for screw, front of K.608 (Mojo Wire kit for Case P-500), includes screw with standard threads to match those machined into block.$1.8212-pack, screw for K.1485-3 (threaded hole) small steel tab at front of K.608.All About Stainless Seed Tubes
Stainless Steel for Less Corrosion
If you’ve ever replaced tubes or boots that have corroded, you know how impossible they are to reuse. Ease of hose installation and removal with new design. Comes with stainless steel bolt to attach to seed boot and a SS hose clamp for easy attach/removal of secondary hose (no more fighting hose barbs to remove hose!). Available in Front Right, Front Left and Rear Seed Tubes.
Content of this page is copyright 2005-2022 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.