Tail, Planter, wv dry
$29.00
Dry tails are no longer sold separately. Buy the entire kit (tail + bracket).
Dry tails are no longer sold separately. Buy the entire kit (tail + bracket).
COMPATIBLE EQUIPMENT: White 6000 Planter, White 8000 Planter, JD 1700 MaxEmerge 5, JD 1700 Series XP, JD 1700, 7300, 7200 Series (Pre-XP), JD 7000, 7100 Series, Kinze 3000 Series, Kinze 2000 Series
| Weight | .226 lbs |
|---|---|
| Dimensions | 16 × 2 × .5 in |
| Compatible Equipment | JD 1700, 7300, 7200 Series (Pre-XP), JD 7000, 7100 Series, Kinze 3000 Series, Kinze 2000 Series, White 6000 Planter, White 8000 Planter, JD 1700 MaxEmerge 5, JD 1700 Series XP |
Related products
-
$29.00(PP# 126010) Replacement tail only, for Universal and Scraper-Mount brackets. *Do not use Mojo Wire with Low-Profile (LP) tails.* LP is Precision Planting's answer for mud accumulation in sticky soils. However, best results are with full-height (Dry, dual-tube) tails + Mojos.$27.50Keeton seed firmer, replacement tail with receiver (no metal bracket) with liquid capability. Fits ALL drill models, except for Sunflower (also recommended for Great Plains Yield Pro planters). Also available with a milled top (Keeton sku #120825-3) for use with our K.608 Mojo for extra pressure and ruggedness.$29.00Replacement tail only, for Universal bracket, or Scraper-Mount bracket. Two liquid application tubes. ‘Dry’ tails also available (same price).$0.20Reinforcement Bolt for Universal Bracket. 12-pack, small machine screws & nuts, reinforcement for Univ brkt, 8-32 x 1.5" machine screw & nut.
Content of this page is copyright 2005-2023 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Chris Horton
Chris Horton brings 25 years of management with him. He grew up on his grandparents farm in Reno County Kansas where they mainly grew wheat and cattle feed. He worked on feed lots as a pen rider and cow-calf operations before moving to Southern California where Chris started a new career in the transportation and transport logistics, eventually managing the western region for a large commercial vehicle leasing company. Chris moved home to Kansas, to manage a local Farmers Coop and then eventually the service dept for a tractor dealership. The opportunity to join the Exapta team came up, and he knew he wanted to be a part of this team.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
