No-till Drill Parts & Equipment
Shop
-
Dimple-lock jamnut, 3/8" (oversize).$0.33
-
Rivet (front attachment of Valion to Kinze 2000 or Deere pre-XP shank).$0.51
-
Rivet, oversize - 3/8", if shank holes were drilled out (front attachment of Valion to Kinze 2000 or JD pre-XP).$0.51
-
Allen-head capscrew, 5/16" x 7/8" (rear attachment of Valion to Kinze 2000 or JD pre-XP shank).$0.36
-
LEGACY P/N WAS V 7173 – allen head capscrew (oversize), 3/8″ X 7/8″ (rear attachment to Kinze 2000 or JD pre-XP shank)$0.56
-
Hex-head capscrew, gr 8, 5/16" X 5/8" (attaches wings to Valion), uses dimple-lock 5/16" jamnut.$0.28
-
Wedge, up to 6-degrees of toe-out for closing wheels held on by a bolt (most late-model planters; early Kinze, JD 7000 & 7200 with updated closing brackets). Fits either 5/8" or 16mm bolts. Ideal for tough conditions such as high-clay, low-OM soils, or soddy seedbeds.$6.50
-
V-Closing Wheel Bracket with Cast “T” handle, Eccentric bushings and Hardened hex step bushings. Fits JD 7200, 7300, 1700 and accepts bolt on style closing wheels. Includes hardware kit to bolt wheels on bracket (standard 5/8 bolts). Closing spring not included; see Exapta’s M.4433 & M.4466..$64.95
-
You’ll need these spring clips to secure the Bullseye seed tube(Part # PPM700160) to the row unit on John Deere 1700 series planters(Model year 2007 and after). Deere seed tubes have a different mounting system and didn’t use the more secure pin method. So you will need to add these to your seed tube order if your planter row unit does NOT have pre-drilled holes for a pin and clip system. One package does 4 rows.$12.00
-
Machine washer, T2X or T3X.$0.35
-
Universal wrap-around planter bracket, for use with Keeton Universal-style tails or Flo-Rite tails (sold separately).$10.50
-
Dry tails are no longer sold separately. Buy the entire kit (tail + bracket).$29.00
All About Hydraulic Oil Coolers & Snorkel Kits
Stay cool; prevent clogging
Hydraulic oil coolers function by circulating oil through a radiator connected to a fan, which forces air over the radiator. This process cools the hydraulic oil while simultaneously warming the air entering the lines, helping to prevent clogging from sticky fertilizers and seed treatments.
When run with a snorkel, it helps remove humidity by pulling drier air from higher up, which is also cleaner air, so you reduce the amount of dust and debris that could cover the radiator. Snorkel kits are available with or without the oil coolers, for air carts and air boom applicators.