No-till Drill Parts & Equipment
Shop
-
For use with Valion L433 and L454 stainless tube holders, 28" length, 1/4 OD. Beveled end for easier insertion through Valion. Special high-temp semi-rigid plastic. COMPATIBLE EQUIPMENT: Kinze 4900, Kinze 3000 Series, Kinze 2000 Series, Planters, JD 1700 MaxEmerge 5, JD 1700 Series XP, JD 1700, 7300, 7200 Series (Pre-XP), JD 7000, 7100 Series" LEGACY P/N WAS L 1128 - Plastic Tubing, heat resistant 1/4" OD, 28", semi-rigid w/beveled end$8.23
-
For use with Valions. High-temp semi-rigid plastic. COMPATIBLE EQUIPMENT: Planters, JD 1700 MaxEmerge 5, JD 1700 Series XP, JD 1700, 7300, 7200 Series (Pre-XP), JD 7000, 7100 Series, Kinze 4900, Kinze 3000 Series, Kinze 2000 Series" LEGACY P/N WAS L 1150FT - Plastic Tubing, 50' Uncut, Heat Resistant 1/4" OD$1766.09
-
LEGACY P/N WAS M 4557 – Bolt and Locknut for T44 (5/8″ x 7″)$3.15
-
Steel bracket for Keeton on CIH P500 drill and New Holland P2080-series. Includes 2 bolts and 2 nuts.$10.75
-
The Ultimate package: 3" PolyFlex tire mounted on a 2-piece, bolt-on rim with cast hub & spokes. Long lip life. Flexible to shed mud and follow the ground contour. Complete, mounted, bolt-on assembly for easy, fast installation. Durable, cast spokes offer the widest opening possible to shed mud and debris.$179.53
-
LEGACY P/N WAS T 32 B – EX10276 – Bushing (spacer for bearing)$6.50
-
Atom-Jet seed boot/scraper (Case P-500/NH 2080, right or left). These carbide-protected replacement scrapers for the single shoot version of these drills are made from a long-lasting abrasion resistant plate to extend the life of the scrapers. The two sets of mounting holes allow for the scrapers to be adjusted up as the disk wears down.… Read More »Atom Jet Seed Boot/Scraper (Right)- Case IH P-500, NH 2080$139.00
-
LEGACY P/N WAS T 44A – STAR, replaceable bolt-on for T32TO, T32FL, & T44$56.37
-
Left Depth CONTROL Arm. Cast in Hi Tensile steel. The Hi Tensile stud is up sized for added strength where the stud leaves the casting.
$25.00 -
Right Depth CONTROL Arm. Cast in Hi Tensile steel. The Hi Tensile stud is up sized for added strength where the stud leaves the casting.$25.00
-
The gauge wheel axle kit is the final piece in making your disc opener completely non-greasable! No more seized axles. Holds cast arms tight.
$195.00 -
The gauge wheel axle kit is the final piece in making your disc opener completely non-greasable! No more seized axles. Holds cast arms tight.
$195.00
All About Hydraulic Oil Coolers & Snorkel Kits
Stay cool; prevent clogging
Hydraulic oil coolers function by circulating oil through a radiator connected to a fan, which forces air over the radiator. This process cools the hydraulic oil while simultaneously warming the air entering the lines, helping to prevent clogging from sticky fertilizers and seed treatments.
When run with a snorkel, it helps remove humidity by pulling drier air from higher up, which is also cleaner air, so you reduce the amount of dust and debris that could cover the radiator. Snorkel kits are available with or without the oil coolers, for air carts and air boom applicators.