No-till Drill Parts & Equipment
Shop
-
Atom-Jet seed boot/scraper (Case P-500/NH 2080, right or left). These carbide-protected replacement scrapers for the single shoot version of these drills are made from a long-lasting abrasion resistant plate to extend the life of the scrapers. The two sets of mounting holes allow for the scrapers to be adjusted up as the disk wears down. The scraper mounts directly to the CNH shank making installation simple. The built-in trash shield is made from the same plate, preventing trash from dropping down inside the scraper, which is a significant improvement over the CNH tin shield that takes an extra set of hands to install.$139.00
-
Now available: Forges de Niaux’s superior blades for Case-IH Precision Disc 500 / NH P-2080 / 2085. Same dimensions as OEM, but with the greater durability of the Forges de Niaux! Harder on the periphery, for 20% greater wear life. Stays sharper longer. (Note: We don’t stock these in our warehouse; all orders will incur shipping.)
$57.21 -
Small steel tab w/ threaded hole for screw, front of K.608 (Mojo Wire kit for Case P-500), includes screw with standard threads to match those machined into block.$5.86
-
Install tool for firming & closing kits
$45.00 -
Removal tool for firming & closing kits
$45.00 -
Grade 8 washer (special ID) and grade 8 special flange locknut (smooth underside; no serrations) for closing arm pivot point, JD 50/60/90 drill. Corresponding OEM parts are only grade 5, and wear out fairly quickly, which creates side-play and lets the spring for the closing arm pop out of its setting too easily.$4.68
-
Call to order: 785-820-8000. Fits all John Deere 60 & 90-series box drills and air drills. Overcomes the biggest limitation of these drills, which is lack of down-stroke as the coil spring relaxes slightly (only a teeny range of optimum spring pressure—like, 0.25")Call for Price -
2.5 inch. If you need taller pipes to improve gravity flow thru the secondaries, or just looking to replace rusted-out pipes or older pipes that lack dimples to redistribute seed & fertilizer more uniformly as it goes up into distribution head. Other sizes available.
$155.00 -
Quick Attach, Standard Tail Only$20.00
-
Quick Attach bracket only: fits JD 7000 thru ME5 (except ExactEmerge's brush-belt); Kinze 2000s. Also fits Kinze 3000s with small/standard seed tubes (not the oversize ones -- you need the scraper-mount Quick Attach brkts for those). Kinze 4900s also need the QA scraper-mount.$20.00
-
This Quick Attach kit fits JD 7000 thru ME5 (except BrushBelt ExactEmerge) & Kinze 2000s. Quick Attach brackets are much sturdier and easier to install than the Universals. Single liquid tube goes all the way through tail. This kit is comprised of KTN150109 bracket along with KTN140045 standard-height tail.
Use different Quick Attach brackets for White 9000s, Kinze 3000s & 4900s.
$40.00 -
Quick Attach Bracket only for White 9000s (doesn't fit White 6000s & 8000s—use Universals instead for those planters)$20.00
All About Hydraulic Oil Coolers & Snorkel Kits
Stay cool; prevent clogging
Hydraulic oil coolers function by circulating oil through a radiator connected to a fan, which forces air over the radiator. This process cools the hydraulic oil while simultaneously warming the air entering the lines, helping to prevent clogging from sticky fertilizers and seed treatments.
When run with a snorkel, it helps remove humidity by pulling drier air from higher up, which is also cleaner air, so you reduce the amount of dust and debris that could cover the radiator. Snorkel kits are available with or without the oil coolers, for air carts and air boom applicators.