List Products

Unique forward bend to put more seeds in the bottom of the furrow. Incredible wear life; doesn’t break off like OEM and aftermarket flaps. Fits Standard and Extended Wear boots. For JD 50 & 90-series drill boots, 7/8 x 5" (includes 1/4"x1"bolt). DOES NOT FIT PRO-SERIES US Patent 9,668,402

You’ll need these pins to secure the Bullseye seed tube (SKU: 04-10598) to the row unit on most John Deere 7200/7300 and 1700 series (Model year 2006 and before) planters. Deere seed tubes have a different mounting system and didn’t use the more secure pin method. Each package secures a row.

Dimple-lock jamnut, 5/16" (attaches wings to Valion, or Valion to pre-XP shank).

The BullsEye Seed Tube reduces seed ricochet and improves wear life. This model fits White 5100(Modification Required),6000, 8000 and 9000 series planters with either a 1/2” or 3/4” sensor eye hole.

This Quick Attach kit fits JD 7000 thru ME5 (except BrushBelt ExactEmerge) & Kinze 2000s. Quick Attach brackets are much sturdier and easier to install than the Universals. Single liquid tube goes all the way through tail. This kit is comprised of KTN150109 bracket along with KTN140045 standard-height tail.

Use different Quick Attach brackets for White 9000s, Kinze 3000s & 4900s.

2.5 inch. If you need taller pipes to improve gravity flow thru the secondaries, or just looking to replace rusted-out pipes or older pipes that lack dimples to redistribute seed & fertilizer more uniformly as it goes up into distribution head. Other sizes available.

Chromed sleeve, bushings, and seals for firming arm's pivot, JD 60/90 drills. Chromed steel sleeve is 62mm length for 60/90-series. (The 50-series requires a different length of sleeve; see the kit ARI.NG69)

Install tool for firming & closing kits

Removal tool for firming & closing kits

20% more wear-life than the next-best. The Forges de Niaux takes it to the next level with a unique steel and special heat-treat process. Same dimensions as OEM. Replaces John Deere Part number N283804.

20% more wear life than OEM. The Forges de Niaux takes it to the next level with a unique steel and special heat-treat process. Same dimensions as OEM. Uses  double-row 205 bearings, whereas OEM and other aftermarket are double-row 204 bearings (smaller diameter). They also use 5/16" rivets instead of 1/4".

Now available: Forges de Niaux’s superior blades for Case-IH Precision Disc 500 / NH P-2080 / 2085.  Same dimensions as OEM, but with the greater durability of the Forges de Niaux!  Harder on the periphery, for 20% greater wear life.  Stays sharper longer.  (Note: We don’t stock these in our warehouse; all orders will incur shipping.)

Keeton Quick Attach bracket and standard tail with single liquid tube. Installs inside of row unit frame using disk scraper mounting holes. Fits Kinze 3000, 4000 series planters with SpeedTube, WaveVision, Bullseye, and "Small" or "Large" seed tubes. Will NOT work with spring loaded disk scrapers.

Clamps tight against shank ears; boot swivels on bolt. Eliminates slop in boot attachment for better seed placement. Works perfectly with Needham boots, or drill out other brands of boots to fit (shoulders are 16mm diameter).

• Reduce/eliminate hairpinning
• Get consistent depth!
• Better use of frame weight (& less frame stress)
• Less sidewall compaction
• Avoid misplaced seeds from sidewall blowout (gauge whls riding up)
• Greater upstroke/downstroke on openers than OEM
• Perfectly uniform pressure on all openers

Left Depth CONTROL Arm. Cast in Hi Tensile steel. The Hi Tensile stud is up sized for added strength where the stud leaves the casting.

Keeton Quick Attach bracket and standard tail with single liquid tube for White 9000s (doesn't fit White 6000s & 8000s—use Universals instead for those planters).

For JD 90-series boots. Patented, simple, bolton device designed to fit between the main opener arm boot pivot flanges and the seed boot, eliminating the up and down movement of the seed boot and allowing for a consistent furrow and more even seed placement. Includes necessary hardware & new seed boot pivot pin.

For 50-series boots. Patented, simple, bolton device designed to fit between the main opener arm boot pivot flanges and the seed boot, eliminating the up and down movement of the seed boot and allowing for a consistent furrow and more even seed placement. Includes necessary hardware & new seed boot pivot pin.

Thompson Wheel T44 with stub shaft, for JD 60/90/Pro-series drills. Zinc plate finish, Bolt-on star wheel = cost-effective replacement stars. Made from military-grade armor plating, for even longer wear life. Includes 1 wheel, 4 bolts, 1 spindle/shaft. For orders of 32 or more, please call for freight truck pricing. US Patent No 6,907,833

LEGACY P/N WAS T 32TO - Thompson Wheel T32, Built-in Toe-out Oct 2023 - Now includes mounting hardware and washer to space away from row frame to clear clevin pin.

Currently on backorder call for availability. 

Medium extension spring for OEM planter closing brackets. Lighter spring pressures are required for spoked closing wheels. To regain the the fine adjustment range you need, consider our medium 55% of OEM.

LEGACY P/N WAS M 4466 – Medium Closing Bracket Spring

FITS ROW UNITS WITH PRO SERIES BOOT (60/90/95/N) INCLUDES QTY 1 LH KIT & QTY 1 RH KIT Forward-bending flap keeps more seed in the furrow. Flexible, doesn’t break off. At least 5x wear life vs others.

• Avoid Pinched Furrows
• 2x - 4x Wear Life of OEM
• Doesn't Drag Below Blades

Tapered Rubber Cap

Secondary Tower New Style

For large, small seed and fertilizer. Run higher fan speeds to prevent line plugs while venting air to prevent seed from blowing out of the furrow. The spiral tube design further maintains seed uniformity to stop clumps of seeds in the furrow. Adjustable air exhaust port. Featuring impressive performance, durability and usability, Airguard is the ideal air drill solution to improve seed and/or fertilizer distribution.