Quick Attach Bracket for White 9000s (does not fit White 6000s & 8000s)
LEGACY P/N WAS 150111 – Keeton Quick Attach Bracket , White 9000
BRACKET ONLY-KEETON QUICK ATTACH, WHITE 9000
$20.00
Quick Attach Bracket only for White 9000s (doesn’t fit White 6000s & 8000s—use Universals instead for those planters)
| Weight | .625 lbs |
|---|---|
| Dimensions | 2 × 9 × 4 in |
| Compatible Equipment | White 9000 Planter |
Related products
- $28.50Quick Attach Keeton bracket for Kinze 4900s (all) & 3000s (with oversize seed tubes). (For non-EdgeVac Kinze 3000s prior to 2013, you can use the wrap-around Quick Attach brkt, which positions the tail about 1.5" farther forward for better performance.) Tail not included.$34.00The Universal Bracket fits Deere 7000s thru XP (& Max-Emerge 5 [without BrushBelt] if brkt legs cut & hole drilled in shank, or if converted to XP guards), Kinze 2000s, White 6000s – 9000s, & some Kinze 3000s (non-EdgeVac, prior to 2013). (Kinze EdgeVac & all 2013 & newer models [including 4900] need Scraper-Mount bracket instead.) (ME5 with BrushBelt needs Quick Attach Keeton.) Note: We recommend Quick Attach Keetons for all planter models that they fit — they’re much more robust and trouble-free as compared to the Universals. Universal Brackets now pre-cut by Exapta for full Mojo compatibility & fast install. No liquid capability (='Dry' tail).$40.00
This Quick Attach kit fits JD 7000 thru ME5 (except BrushBelt ExactEmerge) & Kinze 2000s. Quick Attach brackets are much sturdier and easier to install than the Universals. Single liquid tube goes all the way through tail. This kit is comprised of KTN150109 bracket along with KTN140045 standard-height tail.
Use different Quick Attach brkts for White 9000s, Kinze 3000s & 4900s.
$48.50Keeton Quick Attach bracket and standard tail with single liquid tube. Installs inside of row unit frame using disk scraper mounting holes. Fits Kinze 3000, 4000 series planters with SpeedTube, WaveVision, Bullseye, and "Small" or "Large" seed tubes. Will NOT work with spring loaded disk scrapers.
Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Chris Horton
Chris Horton brings 25 years of management with him. He grew up on his grandparents farm in Reno County Kansas where they mainly grew wheat and cattle feed. He worked on feed lots as a pen rider and cow-calf operations before moving to Southern California where Chris started a new career in the transportation and transport logistics, eventually managing the western region for a large commercial vehicle leasing company. Chris moved home to Kansas, to manage a local Farmers Coop and then eventually the service dept for a tractor dealership. The opportunity to join the Exapta team came up, and he knew he wanted to be a part of this team.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
