Keeton Seed Firmer Quick Attach Kit- White 9000
$40.00
Keeton Quick Attach bracket and standard tail with single liquid tube for White 9000s (doesn’t fit White 6000s & 8000s—use Universals instead for those planters).
Keeton Quick Attach bracket and standard tail with single liquid tube for White 9000s (doesn’t fit White 6000s & 8000s—use Universals instead for those planters
LEGACY P/N WAS 111045 – Keeton Quick Attach Kit (bracket & tail), White 9000
| Weight | .875 lbs |
|---|---|
| Dimensions | 11 × 6 × 2 in |
| Compatible Equipment | Case Precision 500 |
Related products
-
$20.00Quick Attach, Standard Tail Only$48.50
Keeton Quick Attach bracket and standard tail with single liquid tube. Installs inside of row unit frame using disk scraper mounting holes. Fits Kinze 3000, 4000 series planters with SpeedTube, WaveVision, Bullseye, and "Small" or "Large" seed tubes. Will NOT work with spring loaded disk scrapers.
$32.50(PP#100104) The original Keeton seed firmer straps directly to the seed tube, and may be reinforced by strapping around the seed tube guard & shank. It is a good choice if the Quick Attach or Universal brackets won't work with your planter, such as late-model Monosem (using a special steel bracket from Monosem). Also fits JD 7000 and newer (except ExactEmerge), all Kinze 2000s; Kinze 3000s that don't have the oversize seed tubes; White 6000 and newer. (Wave-Vision Ready). Includes liquid tubing and Y-splitter.$34.00The Universal Bracket fits Deere 7000s thru XP (& Max-Emerge 5 [without BrushBelt] if brkt legs cut & hole drilled in shank, or if converted to XP guards), Kinze 2000s, White 6000s – 9000s, & some Kinze 3000s (non-EdgeVac, prior to 2013). (Kinze EdgeVac & all 2013 & newer models [including 4900] need Scraper-Mount bracket instead.) (ME5 with BrushBelt needs Quick Attach Keeton.) Note: We recommend Quick Attach Keetons for all planter models that they fit — they’re much more robust and trouble-free as compared to the Universals. Universal Brackets now pre-cut by Exapta for full Mojo compatibility & fast install. No liquid capability (='Dry' tail).Content of this page is copyright 2005-2025 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Derek Tjaden
Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Jon Zeller
Current Product Engineer
He brings hands-on experience in no-till planting equipment, agricultural research, and design engineering. With a background in farming in NE Kansas and an engineering degree, he spent seven years at Kansas State University and three at Landoll Company. He’s passionate about solving engineering challenges and developing durable, user-friendly products.
