Shop
- $248.00Air Seeder Seed Hose 1.25" I.D. (sold in 100ft rolls). Our secondary hosing is made from PVC blended with polyurethane for up to 2x the wear life of OEM. UV protection for longer wear life in the field. Plus, our secondary hose is the same transparent, see-through spirals as Primary Hose, allowing you to see when product is flowing or locate a blockage. LEGACY P/N WAS ASH 1.25" - 1 -1/4" URETHANE AIR SEEDER HOSE$47.92Forges de Niaux's superior blades for JD MaxEmerge PLUS (Pre-XP) and Kinze. Same dimensions as OEM, but with the greater durability of the Forges de Niaux! Harder on the periphery, for 20% greater wear life. Peer 204 bearing and rivet. Stays sharper longer. (REPLACES USE OF DISC ONLY P/N 03-10518)$71.58Forges de Niaux's superior blades for White 9000, Precision, Momentum. Same dimensions as OEM, but with the greater durability of the Forges de Niaux! Harder on the periphery, for 20% greater wear life. Stays sharper longer. (REPLACES USE OF DISC ONLY P/N 03-10003)$240.00LEGACY P/N WAS AJ FW200L - LEFT Firming Wheel and Bracket for Case P500/NH2080$240.00LEGACY P/N WAS AJ FW200R - RIGHT Firming Wheel and Bracket for Case P500/NH2080 **Drop Ship from AJ**$58.55LEGACY P/N WAS C 102L - Complete firming kit, Case P-500 (LH), full length Keeton$58.55LEGACY P/N WAS C 102R - Complete firming kit, Case P-500 (RH), full length Keeton$15.00FITS ROW UNITS WITH PRO SERIES BOOT (60/90/95/N) INCLUDES QTY 1 LH KIT & QTY 1 RH KIT Forward-bending flap keeps more seed in the furrow. Flexible, doesn’t break off. At least 5x wear life vs others.$7.40Unique forward bend to put more seeds in the bottom of the furrow. Incredible wear life; doesn’t break off like OEM and aftermarket flaps. Fits Standard and Extended Wear boots, but includes u-nut for non-threaded ext wear JD 50 & 90-series drill boots, 7/8 x 5″ (includes 1/4″x7/8″bolt). For Pro series boot, see different kit. US Patent 9,668,402 COMPATIBLE EQUIPMENT: JD 750, 1850 Drill, JD 90-series Drill For std wear boots listed below, see other Ninja seed flap kit w/o u-nut: N284044 - std wear boot RH 90 series, threaded hole N284045 - std wear boot LH 90 series - threaded hole LEGACY P/N WAS M 4708 - KIT-NINJA STD SEED BOOT FLAP, JD
All About Stainless Seed Tubes
Stainless Steel for Less Corrosion
If you’ve ever replaced tubes or boots that have corroded, you know how impossible they are to reuse. Ease of hose installation and removal with new design. Comes with stainless steel bolt to attach to seed boot and a SS hose clamp for easy attach/removal of secondary hose (no more fighting hose barbs to remove hose!). Available in Front Right, Front Left and Rear Seed Tubes.
Content of this page is copyright 2005-2024 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Chris Horton
Chris Horton brings 25 years of management with him. He grew up on his grandparents farm in Reno County Kansas where they mainly grew wheat and cattle feed. He worked on feed lots as a pen rider and cow-calf operations before moving to Southern California where Chris started a new career in the transportation and transport logistics, eventually managing the western region for a large commercial vehicle leasing company. Chris moved home to Kansas, to manage a local Farmers Coop and then eventually the service dept for a tractor dealership. The opportunity to join the Exapta team came up, and he knew he wanted to be a part of this team.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.