Skip to content
Free shipping over $2,500
Search
Close this search box.

Primary & Secondary Hoses

  • Air Seeder Hose Primary 2.5" (sold in 100ft rolls). Our primary hoses are the best on the market, lasting 2x – 3x longer than any other hose during internal sandblast testing. Constructed with a urethane lining in place of the ‘blended’ materials used by OEM & competitor hoses. UV protection to withstand sunlight decay. Transparent black, see-through spirals in material allows you to detect/locate blockages immediately.
    $795.00
  • Air Seeder Hose Primary 2.5" (sold in 100ft rolls). Our primary hoses are the best on the market, lasting 2x – 3x longer than any other hose during internal sandblast testing. Constructed with a urethane lining in place of the ‘blended’ materials used by OEM & competitor hoses. UV protection to withstand sunlight decay. Transparent black, see-through spirals in material allows you to detect/locate blockages immediately.
    $225.00
  • Air Seeder Hose Secondary 1" (sold in 100ft rolls). Our secondary hosing is made from PVC blended with polyurethane for up to 2x the wear life of OEM. UV protection for longer wear life in the field. Plus, our secondary hose is the same transparent, see-through spirals as Primary Hose, allowing you to see when product is flowing or locate a blockage.
    $245.00

All About Primary & Secondary Hoses

Our primary hoses are the best on the market, lasting 2x – 3x longer than any other hose during internal sandblast testing. Constructed with a urethane lining in place of the ‘blended’ materials used by OEM & competitor hoses. UV protection to withstand sunlight decay. Transparent black, see-through spirals in material allows you to detect/locate blockages immediately. Our secondary hosing is made from PVC blended with polyurethane for up to 2x the wear life of OEM. UV protection for longer wear life in the field. Plus, our secondary hose is the same clear black as Primary Hose, allowing you to see when product is flowing or locate a blockage.
“I installed the Primary and Secondary Hoses from Exapta before fall seeding this year. I am impressed with the quality. Just by the looks of it (black spirals), I am confident the abrasion of inside product and also the outside wear (by hoses rubbing against other hoses and frame) will hold-up better than OEM. [2020 update] “I covered 9-10K acres with the hoses and didn’t see much wear, if any wear. Comparing to the OEM hoses that are on their second season and I think I used an entire roll of duck tape just to finish my sorghum!”
Caleb Nine
Lavern, OK, Exapta Customer since 2018

Chris Horton

Chris Horton brings 25 years of management with him. He grew up on his grandparents farm in Reno County Kansas where they mainly grew wheat and cattle feed. He worked on feed lots as a pen rider and cow-calf operations before moving to Southern California where Chris started a new career in the transportation and transport logistics, eventually managing the western region for a large commercial vehicle leasing company. Chris moved home to Kansas, to manage a local Farmers Coop and then eventually the service dept for a tractor dealership. The opportunity to join the Exapta team came up, and he knew he wanted to be a part of this team.

Bob Pagel

Sales & Service Representative

Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.

Jon Zeller

Current Product Engineer

Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.