Seed Lock Wheels
-
$55.00Kit-DuraLok for 60/90 w/ Pro row unit and all N Series LEGACY P/N WAS FW 110 Pro - Duralok for Pro and N series$50.00Fits JD 50/60/90/Pro-series drills, as well as Case’s SDX. Narrow, sleek wheel that's proven to shed mud better than OEM & other aftermarket firming wheels. Now with chamfered hub to let dirt fall away more easily, for better bearing life. And UV-resistant material to hold a bright yellow color for years.$33.21DuraLok firming wheel ring, UV-resistant$0.256 mm bolts w/ threadlocker pre-applied, DuraLok, quantity of 1 LEGACY P/N WAS FW1005 Threadlocker = ND Microshperes Epoxy 593S$9.36Flange/hub, alloy, for DuraLok firming wheel, smooth side (internal threads)$8.14Flange/hub, alloy, for DuraLok firming wheel, bolt head side with counterbores
All About Seed Lock Wheels
Not too narrow, not too wide, not too rigid, not too soft, but just right.
Replaceable bearing
Now with chamfered hub to let dirt fall away more easily, for better bearing life. Easy bearing replacement when that time arrives.
Sleek narrow design stays clean
The narrow, sleek hub sheds mud better because there is more clearance between the hub and the firming arm. Also, there aren’t bolt heads sticking out to snag on vines and straw. The urethane wheel ring itself stays cleaner than other designs too — and stays down in the bottom of the furrow better.
DuraLok vs Others for Seed Firming
The DuraLok is the narrowest firming wheel on the market at 0.45″ and outperforms the others because of this — it simply fits down into the very bottom of the furrow better. Further, when the soil is getting slightly hard or dry, or when you need extra firming such as for soybeans (they must draw more water to germinate than other crops), the relatively hard plastic of the DuraLok does a better job of imprinting the seed into the soil, unlike softer tires where the seed indents the tire instead of the seed embedding in the soil. We’ve done a lot of digging and comparing, and nothing else firms the seeds like DuraLok.
DuraLok vs Competitors for Mud
The sleek shape of the DuraLok allows it to stay clean when OEM & competitor (aftermarket) firming wheels are clogging with mud, pulling seeds out, and dragging mud against the gauge wheel. Even the SDX firming wheel was having more problems than the DuraLok (see photos below). A great many of our customers report that no other seed-lock wheel even comes close to staying as clean as the DuraLok. We’ll keep you running when all the others are clogged up.
“The Ninjas hardly wore at all. They fit down in the furrow so much better than other flaps on the market. I really appreciate what you guys are doing for the farmer.”Ed MengOregon, MO, Exapta customer since ’08 (Ninjas on JD 750)
Content of this page is copyright 2005-2025 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
“We used the DuraLoks on 4,800 acres with a 60-ft [Deere 1890] air drill. They worked better than OEM and [competitor aftermarket firming wheel] in wet conditions. The soil did not stick to the DuraLoks as much as to the others.”
Scott ArthaudKeyes, OK“I tested the DuraLok firming wheels. I highly recommend to pull off the JD wheels and put these on. I was impressed because they are thin enough to fit perfectly in the seed ‘v’ and have flexibility. I’ve never seen mud buildup on them either.”
John HeermannHaxtun, CO Exapta customer since 2015 , (JD 1890 drill)“I’m happy with the [DuraLoks]. They fit the seed slot well; they do a better job of not collecting mud than the other wheels I’ve tried. Overall, I’m very satisfied with them.”
Chris HazellForemost, Alberta Exapta customer since 2011, (JD 1890 drill)Derek Tjaden
Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
