No-till Drill Parts & Equipment

Exapta Solutions is committed to helping no-till growers achieve higher yields for years to come. We deliver on this promise by providing only the best no-till drill parts and equipment. The quality of your equipment – be it opener blades, closing wheels or seed firming devices, or downforce system — make a big difference in your crop yields and in your farm’s overall efficiency and profitability. These products have been carefully designed or chosen to operate effectively and efficiently, in a variety of farming conditions across the US, Canada, and globally (after all, what a seed needs to grow is the same everywhere). We provide a variety of quality aftermarket parts and equipment, including Case-IH and John Deere no-till drill parts. Click on a product below for more details.

  • Aricks depth control arm

    $60.00

    Cast in Hi Tensile steel. The Hi Tensile stud is up-sized for added strength where the stud leaves the casting.

    Read more

  • Aricks Gauge Wheel Axle Kit, Left or Right

    $180.00

    For John Deere 90 and Pro-series openers. The gauge wheel axle kit from Aricks is the final piece in making your disc opener completely non-greasable! No more seized axles. Holds cast arms tight.

    Select options
  • Aricks cover plate for JD drills

    Aricks Heavy-duty Cover Plates

    $30.00

    2x thickness of OEM. Straight-across depth selection for easy adjusting. A durable, logical replacement for the light-duty, inferior criss-cross depth adjuster that rattles and wears out. A much-needed redesign of the traditional diagonal slotting for a simpler, heavy-duty system that will withstand tough conditions better than the OEM. Same depth increments as OEM.

    Add to cart

  • Aricks seed boot for JD 90-series drills, Right or Left

    $125.00

    Includes shoulder bolt. (also fits 60-series if seed tubes are updated) uses the same high-chrome alloy that JD uses in their Extended Wear boots. Uses a unique shoulder-bolt to eliminate the problematic slop in the attachment holes—this is the best fix available. The ultra-high-quality you’ve come to expect from Aricks of Australia.

    Select options
  • Aricks T handle for John Deere drills

    Aricks T-handle for John Deere drills

    $30.00

    A durable, logical replacement for the light-duty, inferior, criss-cross depth adjuster that rattles and wears out.  A much-needed redesign of the traditional diagonal slotting for a simpler, heavy-duty system that will withstand tough conditions better than the OEM. These T-handles don’t jam into the cover plate like the OEM ones do after they wear down on the pins.

    Add to cart

  • Intelligent Ag Flow Monitor

    (iPad not included) Any number of rows up to 156 is possible, and 20 primaries. Not compatible with Box drills. Call 785-820-8000 for current finance programs & options.

    Read more
  • FarmFlex open rim gauge wheel by OTICO

    OTICO, FarmFlex Gauge Wheel, 3″ or 4.5″

    $125.00

    OTICO FARMFLEX Gauge Wheel, 3″ & 4.5″.

    Select options

  • Smallaire Heat Exchanger ‘Remote Mount’

    Includes steel ring to attach ducting to fan, and 10″ hose clamps (no hoses, ducting, or bracket/stand). Hoses and ducting are available for purchase separately. Call to order 785-820-8000

    Read more

  • Smallaire Heat Exchanger complete kit

    Complete kit to make installing our Smallaire heat exchanger much easier and more streamlined on JD 1910 carts, both tow-behind and tow-between.

    Call to order 785-820-8000

    Read more

  • UniForce hydraulic downpressure

    • Reduce/eliminate hairpinning
    • Get consistent depth!
    • Better use of frame weight (& less frame stress)
    • Less sidewall compaction
    • Avoid misplaced seeds from sidewall blowout (gauge whls riding up)
    • Greater upstroke/downstroke on openers than OEM
    • Perfectly uniform pressure on all openers

    Call to order 785-820-8000

    Read more
  • weight brackets

    Weight Bracket

    Holds up to 12 JD suitcase weights per bracket. For air cart drills only, not compatible with CCS.

    Call to order 785-820-8000

    Read more

  • Primary Hose for Air Drills

    $680.00

    Air Seeder Hose Primary 2.5″ (sold in 100ft rolls). Our primary hoses are the best on the market, lasting 2x – 3x longer than any other hose during internal sandblast testing. Constructed with a urethane lining in place of the ‘blended’ materials used by OEM & competitor hoses. UV protection to withstand sunlight decay. Transparent black, see-through spirals in material allows you to detect/locate blockages immediately.

    Add to cart

Content of this page is copyright 2005-2020 Exapta Solutions, Inc. (reprint with written permission only).

Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.

Cart
Checkout - $30.00
  • 1
  • 2
Secured By miniOrange