Skip to content
Free shipping over $2,500
Awaiting product image

Firming Pivot Nut & Washer Kit- JD 50/60/90

$1.68

LEGACY P/N WAS ARI 007 – Flange Locknut and washer for firming pivot point

SKU: 05-10780 Category:

LEGACY P/N WAS ARI 007 – Flange Locknut and washer for firming pivot point

Related products

  • Removal Tool for Firming/Closing Arm

    Removal Tool for Firming/Closing Arm

    Removal tool for firming & closing kits

    $45.00
    Add Info
  • Firming Arm Pivot Kit- JD 50 Drills

    Firming Arm Pivot Kit- JD 50 Drills

    Chromed sleeve, bushings, and seals for firming arm's pivot, JD 750 & 1850 drills (doesn't fit the earliest 750s). Chromed steel sleeve is 69mm version for the 750s and 1850s. Note: The 50-series firming arm has the pin welded into it—you'll need to cut this off of the arm and bore a hole in that spot for a 5/8" bolt.
    $45.00
    Add Info
  • Install Tool for Firming/Closing Arm

    Install Tool for Firming/Closing Arm

    Install tool for firming & closing kits

    $45.00
    Add Info
  • Main Bushing Tool Manual Kit

    Main Bushing Tool Manual Kit

    Kit-Removal Tool for Main-Pin Bushings, JD 50/60/90 drills, Manual Tool Manual removal tool for the bushings of the front/main pin of JD 50/60/90 drill openers. Use this to pull the bushings out. Kit includes stainless tube brush to clean out dirt and rust. Also includes lubricant. FOR USE WITH IMPACT WRENCH LEGACY P/N WAS ARI 003M - UPDATED Removal Tool for Main-Pin Bushings, JD 50/60/90 drills, Manual Tool
    $175.42
    Add Info

Derek Tjaden

Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.

Bob Pagel

Sales & Service Representative

Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.

Jon Zeller

Current Product Engineer

He brings hands-on experience in no-till planting equipment, agricultural research, and design engineering. With a background in farming in NE Kansas and an engineering degree, he spent seven years at Kansas State University and three at Landoll Company. He’s passionate about solving engineering challenges and developing durable, user-friendly products.