Disc Opener Kit- FDN White 9000, Precision, Momentum 15.8″ (W/Cap)
$71.58
Forges de Niaux’s superior blades for White 9000, Precision, Momentum. Same dimensions as OEM, but with the greater durability of the Forges de Niaux! Harder on the periphery, for 20% greater wear life. Stays sharper longer.
(REPLACES USE OF DISC ONLY P/N 03-10003)
Forges de Niaux’s superior blades for White 9000, Precision, Momentum. Same dimensions as OEM, but with the greater durability of the Forges de Niaux! Harder on the periphery, for 20% greater wear life. Stays sharper longer.
(REPLACES USE OF DISC ONLY P/N 03-10003)
| Weight | 8 lbs |
|---|---|
| Dimensions | 18 × 18 × 2.5 in |
Related products
-
$8.00HEX HEAD BOLT KIT, 5/8 -11 X 1-3/4", RH & LH THREADED BOLTS GRADE 5, KINZE 3000 & 4000 SERIES 1 KIT NEEDED PER ROW UNIT TO INSTALL QTY 2 OF 03-10517 FDN 205 DBL BEARING DISC OPENER IF REPLACING OEM OR SINGLE ROW BEARING DISC OPENER WITH 1-1/2" LONG BOLT.$62.00
20% more wear life than OEM. The Forges de Niaux takes it to the next level with a unique steel and special heat-treat process. Same dimensions as OEM. Uses double-row 205 bearings, whereas OEM and other aftermarket are double-row 204 bearings (smaller diameter). They also use 5/16" rivets instead of 1/4".
$47.92Forges de Niaux's superior blades for JD MaxEmerge PLUS (Pre-XP) and Kinze. Same dimensions as OEM, but with the greater durability of the Forges de Niaux! Harder on the periphery, for 20% greater wear life. 204 bearing and rivet. Stays sharper longer. (REPLACES USE OF DISC ONLY P/N 03-10518)Content of this page is copyright 2005-2025 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Derek Tjaden
Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.
Jon Zeller
Current Product Engineer
He brings hands-on experience in no-till planting equipment, agricultural research, and design engineering. With a background in farming in NE Kansas and an engineering degree, he spent seven years at Kansas State University and three at Landoll Company. He’s passionate about solving engineering challenges and developing durable, user-friendly products.
