Skip to content
Free shipping over $2,500
05-11059 Firming Pivot, Non Pro-Series

Firming Pivot Assembly- 60 & 90 Series (Non-ProSeries)

$61.91

Firming pivot parts for 60/90 JD Air Seeders/Drills with Non Pro-Series Row units. Includes grease zerk plug, bolt, nut and washers.

SKU: 05-11059 Category:

Firming pivot parts for 60/90 John Deere Air Seeders/Drills with Non-ProSeries Row units. Includes grease zerk plug, bolt, nut and washers.

Weight 1.228 lbs
Dimensions 4.43 × 1.78 × 1.78 in

Related products

  • Main Pivot with Bolt and Nut Assembly

    Main Pivot with Bolt and Nut Assembly

    This is a new product currently available for backorder. While it's not yet in stock, you may add it to your order today. Availability is expected Fall 2025. Orders will be fulfilled as soon as inventory becomes available. Main pivot kit with thrust washer and mounting hardware. Bushings and pin are hardened steel along with extended length for increased wear life. Pins include a recess on each end to aid removal and install with an air hammer.

    $60.01
    Add Info
  • Closing Pivot Assembly- 50, 60, 90 Series (Non-ProSeries)

    Closing Pivot Assembly- 50, 60, 90 Series (Non-ProSeries)

    Closing pivot parts for 50/60/90 JD Air Seeders/Drills with Non Pro-Series Row units. Includes grease zerk plug, bolt, nut and washers.
    $64.88
    Add Info
  • Closing Pivot Assembly Pro-Series

    Closing Pivot Assembly Pro-Series

    Closing pivot parts for JD Air Seeders/Drills with Pro-Series Row units. Includes taller than OEM dust cap (for putting bolt head on side of closing arm) bolt, nut and washers.

    $66.70
    Add Info
  • Firming Pivot Assembly (Reuse 1 1/8″ Tube)

    Firming Pivot Assembly (Reuse 1 1/8″ Tube)

    Firming pivot parts for any series of JD Air Seeders/Drills with OEM Pro-Series or Exapta 1-1/8" tubes. Includes washers.
    $37.01
    Add Info
Name

Derek Tjaden

Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.

Bob Pagel

Sales & Service Representative

Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.

Jon Zeller

Current Product Engineer

He brings hands-on experience in no-till planting equipment, agricultural research, and design engineering. With a background in farming in NE Kansas and an engineering degree, he spent seven years at Kansas State University and three at Landoll Company. He’s passionate about solving engineering challenges and developing durable, user-friendly products.