Skip to content
Free shipping over $2,500
Closing Pivot Assembly- 50, 60, 90 Series (Non-ProSeries)

Closing Pivot Assembly- 50, 60, 90 Series (Non-ProSeries)

$64.88

Closing pivot parts for 50/60/90 JD Air Seeders/Drills with Non Pro-Series Row units. Includes grease zerk plug, bolt, nut and washers.

SKU: 06-11056 Category:

Closing pivot parts for 50/60/90 JD Air Seeders/Drills with Non-ProSeries Row units. Includes grease zerk plug, bolt, nut and washers.

Weight 1.518 lbs
Dimensions 5.63 × 1.78 × 1.78 in

Related products

  • Firming Pivot Assembly (Reuse 1 1/8″ Tube)

    Firming Pivot Assembly (Reuse 1 1/8″ Tube)

    Firming pivot parts for any series of JD Air Seeders/Drills with OEM Pro-Series or Exapta 1-1/8" tubes. Includes washers.
    $37.01
    Add Info
  • Main Pivot with Bolt and Nut Assembly

    Main Pivot with Bolt and Nut Assembly

    This is a new product currently available for backorder. While it's not yet in stock, you may add it to your order today. Availability is expected Fall 2025. Orders will be fulfilled as soon as inventory becomes available. Main pivot kit with thrust washer and mounting hardware. Bushings and pin are hardened steel along with extended length for increased wear life. Pins include a recess on each end to aid removal and install with an air hammer.

    $60.01
    Add Info
  • Main Pivot Nut and Bolt Kit

    Main Pivot Nut and Bolt Kit

    Bolt and Nut for retaining main pins on all series of JD air seeders/drills.
    $4.84
    Options Info
  • Closing Pivot Nut & Washer Kit- JD 50/60/90

    Closing Pivot Nut & Washer Kit- JD 50/60/90

    Grade 8 washer (special ID) and grade 8 special flange locknut (smooth underside; no serrations) for closing arm pivot point, JD 50/60/90 drill. Corresponding OEM parts are only grade 5, and wear out fairly quickly, which creates side-play and lets the spring for the closing arm pop out of its setting too easily.
    $4.68
    Add Info
Name

Derek Tjaden

Derek is Kansas native who grew up in a 100% no-till farming operation. From an early age the benefits of no-till were made known to Derek by his father and by attending no-till conferences. From there he furthered his passion for soils while at Kansas State University getting his agronomy degree. He has had the experience of working in various roles and sectors of agriculture from sales and consulting to management, which have all been within production agriculture. Derek has also worked in specialty ag markets such as turf and ornamentals.

Bob Pagel

Sales & Service Representative

Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota.

Jon Zeller

Current Product Engineer

He brings hands-on experience in no-till planting equipment, agricultural research, and design engineering. With a background in farming in NE Kansas and an engineering degree, he spent seven years at Kansas State University and three at Landoll Company. He’s passionate about solving engineering challenges and developing durable, user-friendly products.