Plastic Tubing, 1/4″ OD, 50′ Bulk or Cut to Length OD
$188.00
For use with Valions, 50 ft roll, 1/4″ OD. Special high-temp semi-rigid plastic.
For use with Valions, 50 ft roll, 1/4? OD. Special high-temp semi-rigid plastic.
COMPATIBLE EQUIPMENT: Planters, JD 1700 MaxEmerge 5, JD 1700 Series XP, JD 1700, 7300, 7200 Series (Pre-XP), JD 7000, 7100 Series, Kinze 4900, Kinze 3000 Series, Kinze 2000 Series
| Weight | 2 lbs |
|---|---|
| Dimensions | 18 × 18 × 1 in |
| Compatible Equipment | Planters, JD 1700 MaxEmerge 5, JD 1700 Series XP, JD 1700, 7300, 7200 Series (Pre-XP), JD 7000, 7100 Series, Kinze 4900, Kinze 3000 Series, Kinze 2000 Series |
Related products
-
$0.31Hex bolt, 5/16 x 1.25", gr 8, for Kinze 3000-series Valion (attachment to shank).$25.00Heavy-duty liquid tube holder, protects 1/4″ OD plastic tube on front of shank for JD XP & MaxEmerge 5 planters. New, improved shape to fit up tight to the front of these shanks (our L.433 left a gap on these shanks). **Our heat-resistant tubing is recommended for Valions.** Heat-resistant tubing sold separately. Not compatible with ExactEmerge’s BrushBelt. Not compatible with JD heavy-duty scrapers that attach to the front of the shank. For JD 7200s & 'Pro' heavy-duty welded shanks, see our L.433 liquid tube holder. For JD 7000 & Kinze 2000s, see our L.133 holder. For Kinze 4900s, see our L.144 tube holder.$2.34Bushing, 5/8" OD, ~ 5/16" ID x 0.335", hardened (both attachment points of Valion to Kinze 2000 or JD pre-XP shank).$46.04Kit-Valion "oversize" seed tube guard (was V153) Valion seed tube guard w/ wings, *oversize* bolts, bushings; for JD pre-XP & Kinze 2000 shanks with holes drilled out to 3/8? COMPATIBLE EQUIPMENT: JD 1700, 7300, 7200 Series (Pre-XP), JD 7000, 7100 Series, Kinze 2000 Series " LEGACY P/N WAS V 153 - Valion (chrome alloy) for pre-XP and Kinze 2000s: Oversize
Content of this page is copyright 2005-2023 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Chris Horton
Chris Horton brings 25 years of management with him. He grew up on his grandparents farm in Reno County Kansas where they mainly grew wheat and cattle feed. He worked on feed lots as a pen rider and cow-calf operations before moving to Southern California where Chris started a new career in the transportation and transport logistics, eventually managing the western region for a large commercial vehicle leasing company. Chris moved home to Kansas, to manage a local Farmers Coop and then eventually the service dept for a tractor dealership. The opportunity to join the Exapta team came up, and he knew he wanted to be a part of this team.
Bob Pagel
Sales & Service Representative
Prior to joining Exapta, Bob Pagel was an Agricultural Territory Sales Manager for Ritchie Brothers, serving parts of MN, WI and IA. He continues to support his family farm in SE Minnesota
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
