Complete Upgrade, CIH P-500 drill, LH opener
$269.25
Keeton + Mojo + Keeton mounting bracket kit + closing bracket kit + Thompson wheel. LH refers to openers on the LH side of the drill when standing behind the drill. Looking in the direction of travel, the gauge wheel for these openers is on the LH side.
Keeton + Mojo + Keeton mounting bracket kit + closing bracket kit + Thompson wheel.
| Weight | 19 lbs |
|---|---|
| Dimensions | 16.5 × 1.5 × 5.5 in |
| Compatible Equipment | Case Precision 500 |
Replacement full-length tail, for Case P-500/NH 2080, SKU 120825-1
Mojo Wire Kit for Exapta's milled-top drill Keeton. Case P-500 / NH 2080 drills & more
Thompson Wheel T32, flat cap
Related products
-
$11.57Lighter torsion spring, closing arm, CIH Precision 500 / NH P2080 drill.$35.002x thickness of OEM. Straight-across depth selection for easy adjusting. A durable, logical replacement for the light-duty, inferior criss-cross depth adjuster that rattles and wears out. A much-needed redesign of the traditional diagonal slotting for a simpler, heavy-duty system that will withstand tough conditions better than the OEM. Same depth increments as OEM.$78.00
T-whl bracket kit, for CIH Precision 500 (NH 2080/2085) drills, w/ torsion spring, 5/8 x7/8" bushing, spacer washer, 5/8" bolts, locknut, star lock-washer. Closing bracket has built-in 7-degree toe-out. Thompson wheel not included. **This closing system must be used with a Keeton + Mojo Wire, since the Thompson wheel doesn't do any packing.**
$35.80Replacement full-length tail, ONLY for Case P-500/NH 2080 T-Wheel, SKU 120825-1. 2-piece drill Keeton, with chopped receiver & milled top, but full-length, using Exapta's closing system. For use with K.608 Mojo. Must have Exapta steel bracket to install.MenuContent of this page is copyright 2005-2021 Exapta Solutions, Inc. (reprint with written permission only). Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
