Complete firming kit, Case P-500 (LH), full length Keeton
$59.55
Complete firming kit, Case Precision 500 / NH 2080 drills, includes Keeton (full-length), steel bracket (C 101) & K 608 Mojo.
Complete firming kit, Case Precision 500 / NH 2080 drills, includes Keeton (full-length), steel bracket (C 101) & K 608 Mojo.
| Weight | .875 lbs |
|---|---|
| Dimensions | 11 × 6 × 2 in |
| Compatible Equipment | Case Precision 500 |
Drill Keeton, shaved full length tail, modified receiver for P500 only
Mojo Wire Kit for Exapta's milled-top drill Keeton. Case P-500 / NH 2080 drills & more
Related products
-
$36.80ONLY for Case P-500/NH 2080 OEM, SKU 120825-2. Replacement tail, 2-pc Keeton w/ chopped receiver & milled top, chopped tail. For use with OEM closing, or any closing other than Exapta's (which moves the closing wheel rearward for more clearance). K 608 Mojo wire fits this tail. Must have Exapta steel bracket to install.$269.25Keeton + Mojo + Keeton mounting bracket kit + closing bracket kit + Thompson wheel. LH refers to openers on the LH side of the drill when standing behind the drill. Looking in the direction of travel, the gauge wheel for these openers is on the LH side.$78.00
T-whl bracket kit, for CIH Precision 500 (NH 2080/2085) drills, w/ torsion spring, 5/8 x7/8" bushing, spacer washer, 5/8" bolts, locknut, star lock-washer. Closing bracket has built-in 7-degree toe-out. Thompson wheel not included. **This closing system must be used with a Keeton + Mojo Wire, since the Thompson wheel doesn't do any packing.**
$60.55Complete firming kit, Case Precision 500 / NH 2080 drills, includes Ktn (chopped), steel brkt (C.101) & K.608 Mojo. *Should be used with OEM packer wheel
Content of this page is copyright 2005-2022 Exapta Solutions, Inc. (reprint with written permission only).
Thompson wheel covered by U.S. Patent No. 6,907,833. Liquid delivery feature of Valion seed tube guards is U.S. Patent No. 8,978,564. Ninja seed bounce flap U.S. Patent Pending. UniForce U.S. Patent Pending. All rights reserved on other designs. Exapta is a registered trademark of Exapta Solutions, Inc. Keeton is a registered trademark of Precision Planting. Mojo Wire, Thompson wheel, Valion guard, Ninja flap, UniForce, DuraLok, No-till Seeding Explained, and No-till Seeding School are trademarks of Exapta. Disclaimer: Recommendations & page content are current, accurate, and believed to be broadly applicable as of the time of writing (Dec 2005) and last update (2005 – 2014). Because of diversity of soils, climate, crops, planter & drill models/designs marketed worldwide, combinations of attachments, etc., actual results may vary. No warranty is made as to actual results obtained. Should you encounter exceptions or worthwhile annotations to the statements made on this page, please contact us.
Chris Horton
Chris Horton brings 25 years of management with him. He grew up on his grandparents farm in Reno County Kansas where they mainly grew wheat and cattle feed. He worked on feed lots as a pen rider and cow-calf operations before moving to Southern California where Chris started a new career in the transportation and transport logistics, eventually managing the western region for a large commercial vehicle leasing company. Chris moved home to Kansas, to manage a local Farmers Coop and then eventually the service dept for a tractor dealership. The opportunity to join the Exapta team came up, and he knew he wanted to be a part of this team.
Michael Beasley
Finance Manager
Michael Beasley joined Exapta after serving in various financial roles over the course of his career, from Controller to Chief Operating Officer. He also spent many years in sales walking fields with growers and learning about their greatest challenges. Michael believes in the future of agriculture and the importance of no-till. He is a strong advocate for regenerative farming and soil health.
Jon Zeller
Current Product Engineer
Jonathan Zeller joined Exapta excited to return to working with no-till planting equipment. He supported research of no-till planting and other ag related projects for 7 years with Kansas State University’s Agricultural Engineering Department after getting his engineering degree. He later worked 3 years for Landoll Company, LLC. where he gained experience in a design engineering role. Jonathan grew up on a small family farm in NE Kansas working with row crops, hay and cattle. Jonathan enjoys solving engineering problems and improving or creating products to be robust and easy to install and service.
